PVQシリーズアキシャルピストンポンプ
写真シリーズ
The Blince PVQ Piston Pump is a low-noise hydraulic piston pump designed for industrial hydraulic systems. As a Variable Displacement Axial Piston Pump, it offers 10.5–45.1 cm³/rev displacement, rated speed of 1800 r/min, pressure capability up to 210 bar, and multiple control options including pressure compensation, load sensing, remote pressure control, electric dual-range control, and unloading valve control. It is widely used in hydraulic power units, machine tools, presses, plastic machinery, test equipment, and industrial automation systems.
構成モデル/注文番号
PVQシリーズアキシャルピストンポンプ
クリップボードにコピー
↓設定されたパラメータ
パラメータはまだ設定されていません
設定が未完了でもお問い合わせを送信できます。完全な型番のコピーやサンプルダウンロードには、すべてのオプションを選択してください。
今すぐお問い合わせ
サンプルダウンロード
シリーズの利点
Product Advantages
1. Low Noise Operation
The Blince PVQ piston pump is designed as a low-noise hydraulic piston pump, making it suitable for factories, machine tools, test benches, and indoor hydraulic equipment where noise control is important.
2. Variable Displacement Design
As a Variable Displacement Axial Piston Pump, the PVQ series can adjust output flow based on system demand. This helps reduce wasted energy compared with a Fixed displacement axial piston pump.
3. Multiple Displacement Options
With displacement options from 10.5 to 45.1 cm³/rev, the PVQ series can match different hydraulic flow requirements, from compact power units to larger industrial hydraulic systems.
4. Pressure Compensation Control
Pressure compensation helps maintain system pressure while reducing pump output when full flow is not required. This improves system stability and reduces unnecessary heat generation.
5. Load Sensing Efficiency
Load sensing control allows the pump to respond to actual load demand. This is useful for hydraulic systems with changing actuator speeds, variable loads, or proportional valve control.
6. Remote and Electric Control Options
The PVQ series supports remote pressure control and electric dual-range pressure compensation, allowing users to build more flexible hydraulic control systems.
7. Wide Fluid Compatibility
The pump can work with petroleum-based hydraulic oil, synthetic hydraulic oil, water-containing hydraulic fluids, and phosphate ester fluids, depending on system requirements.
8. Thru-Drive Capability
Selected PVQ pumps can be configured with thru-drive options, making them suitable for tandem pump systems and compact hydraulic power units.
9. Suitable for Industrial Applications
The PVQ series is especially suitable for industrial equipment where smooth operation, low noise, and long service life are important.
The Blince PVQ piston pump is designed as a low-noise hydraulic piston pump, making it suitable for factories, machine tools, test benches, and indoor hydraulic equipment where noise control is important.
2. Variable Displacement Design
As a Variable Displacement Axial Piston Pump, the PVQ series can adjust output flow based on system demand. This helps reduce wasted energy compared with a Fixed displacement axial piston pump.
3. Multiple Displacement Options
With displacement options from 10.5 to 45.1 cm³/rev, the PVQ series can match different hydraulic flow requirements, from compact power units to larger industrial hydraulic systems.
4. Pressure Compensation Control
Pressure compensation helps maintain system pressure while reducing pump output when full flow is not required. This improves system stability and reduces unnecessary heat generation.
5. Load Sensing Efficiency
Load sensing control allows the pump to respond to actual load demand. This is useful for hydraulic systems with changing actuator speeds, variable loads, or proportional valve control.
6. Remote and Electric Control Options
The PVQ series supports remote pressure control and electric dual-range pressure compensation, allowing users to build more flexible hydraulic control systems.
7. Wide Fluid Compatibility
The pump can work with petroleum-based hydraulic oil, synthetic hydraulic oil, water-containing hydraulic fluids, and phosphate ester fluids, depending on system requirements.
8. Thru-Drive Capability
Selected PVQ pumps can be configured with thru-drive options, making them suitable for tandem pump systems and compact hydraulic power units.
9. Suitable for Industrial Applications
The PVQ series is especially suitable for industrial equipment where smooth operation, low noise, and long service life are important.
技術仕様
| アイテム | Blince PVQ ピストンポンプの仕様 |
|---|---|
| 製品名 | Blince PVQ ピストン ポンプ |
| ポンプの種類 | 油圧ピストンポンプ |
| ポンプの構造 | 可変容量型アキシャルピストンポンプ |
| シリーズモデル | PVQ10、PVQ13、PVQ20、PVQ25、PVQ32、PVQ40、PVQ45 |
| 変位範囲 | 10.5 ～ 45.1 cm3/回転 |
| 定格速度 | 1800r/min |
| 最大圧力 | 最大 210 bar / 3000 psi |
| 低圧モデル | PVQ13 および PVQ32: 140 bar / 2000 psi |
| PVQ45 最高圧力 | 186 バール / 2700 psi |
| 制御オプション | 圧力補償器、ロードセンシング、リモート圧力制御、電動デュアルレンジ圧力補償器、アンロードバルブ |
| フロー制御オプション | 11 bar または 24 bar の差圧設定による負荷検知 |
| 最大変位停止 | オプションで調整可能な最大音量ストップ |
| 回転方向 | 右手/時計回りまたは左手/反時計回り |
| ポートオプション | 背面ポートと側面ポートのオプション |
| シャフトオプション | モデルに応じてキー付きシャフト、スプラインシャフト、ISO シャフトのオプション |
| スルードライブオプション | 一部の PVQ モデルで利用可能 |
| 流体の適合性 | 石油系作動油、合成作動油、含水作動油、リン酸エステル系作動油 |
| 主な用途 | 産業用油圧システム、工作機械、プレス、プラスチック機械、油圧ユニット、試験装置 |
モデル仕様
| モデル | 変位 | 定格速度 | 最大圧力 | 一般的な使用方法 |
|---|---|---|---|---|
| PVQ10 | 10.5 cm3/回転 | 1800r/min | 210 バール / 3000 psi | コンパクトな産業用油圧システム |
| PVQ13 | 13.8 cm3/回転 | 1800r/min | 140 バール / 2000 psi | 低騒音中圧システム |
| PVQ20 | 21.1 cm3/回転 | 1800r/min | 210 バール / 3000 psi | 工作機械および油圧ユニット |
| PVQ25 | 25.2 cm3/回転 | 1800r/min | 210 バール / 3000 psi | 産業機器およびプレス |
| PVQ32 | 32.9 cm3/回転 | 1800r/min | 140 バール / 2000 psi | 低圧大流量産業用回路 |
| PVQ40 | 41.0 cm3/回転 | 1800r/min | 210 バール / 3000 psi | 大型水力発電システム |
| PVQ45 | 45.1 cm3/回転 | 1800r/min | 186 バール / 2700 psi | 中～大型産業用油圧システム |
応用産業
Application Scenarios
Hydraulic Power Units
The Blince PVQ piston pump is suitable for hydraulic power packs and hydraulic stations requiring stable flow, low noise, and pressure control.
Machine Tools
This Axial Piston Pump can be used in CNC machines, grinding machines, milling machines, and other machine tools for clamping, feeding, positioning, and lubrication circuits.
Industrial Presses
The PVQ series is suitable for hydraulic presses, forming machines, bending machines, and stamping equipment requiring stable pressure and efficient flow control.
Plastic Machinery
The Variable Displacement Axial Piston Pump is suitable for injection molding machines and plastic processing equipment where energy saving and smooth hydraulic response are important.
Test Benches and Laboratory Equipment
Because of its low-noise characteristics, the Blince PVQ pump can be used in hydraulic test stands, laboratory systems, and precision hydraulic equipment.
Industrial Automation Systems
The PVQ series can support automated production lines, clamping systems, lifting units, and other equipment that requires controlled hydraulic movement.
Multi-Pump Hydraulic Systems
With thru-drive options on selected models, the PVQ pump can be used in compact multi-pump hydraulic systems where one prime mover drives multiple hydraulic circuits.